The E&P Hydraulics full levelling system allows your caravan to be level and stable in under two minutes. With the new touch panel the system has never been easier to operate either in the holder or while hand held. The system can also be used manually with one side of the van being rasied allowing your wheel locks to be fitted and secured easily.
For details on fitting please fill out the form at the bottom of the page
The E&P hydraulic compact system is fitted with two central rams on the axle. This allows you to automatically level side to side making it easy to use your jockey wheel to level front to back. The system can also be used manually to lift either side to allow easy fitting of wheel locks.
For details on fitting please fill out the form at the bottom of the page
The E&P Touch panel comes standard with all full E&P Caravan systems from A&E Leisure. With all controls usable while in the charging station or removed its E&P most versatile panel ever. Also fitted on the charging station are additional level and retract buttons so you never need to worry.
For details on fitting please fill out the form at the bottom of the page
120 seconds, maximum, but often less than a minute.
12 Volts. The E&P Hydraulics Level C system takes its power from the caravan leisure battery and it doesn't take much when compared to motor movers. Our system software is designed to protect the battery and, therefore, if the battery voltage is low then the hydraulic levelling system cannot be used and an alarm will sound on the control panel to indicate this. In the event your battery voltage is too low, you can hook up to the site electrics, or your towing vehicle to recharge it.
Whilst it is you, the user, who is responsible for ensuring the caravan is safe to tow, this scenario is nearly impossible because you would likely be unable to hook up the caravan to the tow vehicle with the jacks down. However, it is always good practice to walk around the caravan and visually check that all jacks are fully stowed before leaving site.
No, the caravan needs to be empty, even if it's raining! Having people moving within the caravan will cause the level sensor to go out of synchronisation.
It is also important that you keep watch on what is happening around and underneath the caravan, so get everyone involved in checking for hazards.
You can still auto-level or auto-retract the system from the touchpanel housing in the event you lose or damage the touchpanel. The touchpanel has a long-life rechargeable battery that will automatically recharge as soon as it is placed back in the housing.
Replacement touchpanels can be ordered from an E&P Hydraulics Accredited Partner if required.
No, it is a closed loop hydraulic system.
Yes, this is useful for protecting tyres during long periods of storage, but it will not completely stop tyre degradation. It can also help prevent a sticking handbrake and make the caravan more secure against theft. If you are leaving the system deployed for a long period, please use a silicon-based protective spray on the axle jacks, to prolong their durability.
Yes, this aids the fit of wheel security devices greatly. However you, the user, are responsible for ensuring the caravan is safe to lift and that it is adequately supported with axle stands if any work is being carried out under the caravan. Please do NOT work under a caravan if the only method of support is the E&P Levelsystem.
The full Level C system will level the caravan using two hydraulic jacks, mounted to the axle, and steady the caravan using four automatic hydraulic corner steadies. This levels the caravan from side to side and front and back automatically. The Compact version of the system using your existing corner steadies and simply levels from side to side. You would still need to deploy the corner steadies manually.
Read more on the blog.
The levelling system installation can take upto 8 hours, depending on the caravan in question. You would therefore be required to leave your caravan with the Installer for a full working day (08:30 - 16:30 typically). Our Installation Partners will happily advise on any travel and accommodation questions you may have.